CV-eksempel for Structural Engineer

Choose the right format for a Structural Engineer resume

Use a reverse-chronological format. Structural engineering hiring managers move fast — project managers, department heads, and HR all skim the same document, so your most recent and relevant experience needs to appear within the top third of the page. A functional or hybrid format raises red flags unless you are making a significant career pivot.

Keep it to one page if you have fewer than ten years of experience; two pages are acceptable for senior engineers with multiple large-scale projects. Use clean section headers, consistent font sizing (10–12pt), and enough white space to make load calculations and project specs easy to scan. PDF is the standard submission format unless the job posting specifies otherwise.

• Margins: 0.75–1 inch on all sides
• Font: Calibri, Arial, or Georgia — nothing decorative
• File name: LastName_FirstName_StructuralEngineer.pdf
• Section order: Contact → Summary → Experience → Skills → Education → Licenses

Write a professional summary that earns a second look

Your summary is three to four lines that answer: what type of structural engineer are you, what project types define your career, and what measurable value do you deliver? Avoid vague phrases like 'results-driven professional.' Name the building types, software, and codes you work with daily.

Example: "Licensed PE with 9 years of structural engineering experience specializing in mid-rise commercial and mixed-use concrete construction. Proficient in ETABS, RAM Structural System, and RISA-3D. Delivered 14 projects across California and Nevada in full compliance with IBC and ASCE 7-22, including a $47M, 12-story office tower completed 6 weeks ahead of schedule. SEAOC member with active SE license in CA."

Write work-experience bullets that show engineering impact

Each bullet should follow an action-verb → task → quantified result structure. Avoid describing your job duties in passive terms. Hiring managers want to see project scale, structural systems, software used, and outcomes — cost savings, schedule improvements, load capacity achieved, or code compliance milestones. Two or three strong bullets per role beat six generic ones.

• Designed lateral force-resisting steel moment frames for a 220,000 sq ft distribution center using RISA-3D, reducing steel tonnage by 11% versus the preliminary design and saving the client $310,000 in material costs.
• Led peer review and structural analysis of a 7-story post-tensioned concrete parking structure under ASCE 7-16 seismic requirements, identifying three critical connection deficiencies that prevented a costly redesign during construction.

Skills and certifications recruiters and ATS systems look for

Applicant tracking systems at large ENR 500 firms and government agencies filter on specific keywords before a human ever opens your file. List your software, codes, and credentials explicitly — do not assume they will be inferred from your job titles. Separate hard technical skills from softer project-delivery skills, and always list your license status and number.

Certifications like the SE, PE, and EIT carry real weight. If you are pursuing LEED AP or have completed the Structural Engineering Certification Board (SECB) exam, include those too. For federal or DOD projects, note any security clearance.

• Software: ETABS, SAP2000, RISA-3D, RAM Structural System, Revit Structure, AutoCAD, Tekla Structures, STAAD.Pro
• Codes: IBC, ASCE 7, ACI 318, AISC 360, NDS, AASHTO LRFD
• Licenses: PE (list states), SE (CA, IL, WA, OR, HI require separate SE exam)
• Certifications: EIT, LEED AP BD+C, SECB, AWS CWI (if applicable)
• Project delivery: BIM coordination, RFI response, construction administration, shop drawing review

Education, licenses, and professional extras

List your highest degree first: degree name, institution, and graduation year. For structural engineers, an ABET-accredited BS or MS in Civil or Structural Engineering is the baseline expectation. If your GPA was above 3.5, include it within five years of graduation — after that, drop it. A master's degree in structural engineering or geotechnical engineering is worth calling out explicitly because many firms tier salaries by degree level.

Below education, add a concise section for professional affiliations and continuing education. SEAOC, ASCE, ACI, and AISC memberships signal that you stay current with code changes and industry practice. If you have presented at a conference, published a paper, or contributed to a code committee, list it — these details differentiate senior candidates in competitive markets.

• Include PE license number and expiration date — some firms verify before interviewing
• Note any graduate coursework in earthquake engineering, wind engineering, or bridge design if targeting those niches
• List continuing education credits only if they are directly relevant (e.g., ASCE 7-22 update seminar)

Mistakes to avoid

• ×Listing software tools in the summary or objective instead of in a dedicated skills section makes it harder for ATS systems to parse your qualifications correctly.
• ×Describing project responsibilities without project scale — omitting square footage, construction cost, number of stories, or structural system — gives hiring managers no way to assess the complexity of your experience.
• ×Failing to specify which states your PE or SE license is active in forces recruiters to follow up on a basic credential that should be immediately clear.
• ×Using generic civil engineering language instead of structural-specific terminology (e.g., writing 'reviewed drawings' instead of 'performed connection design checks per AISC 360 Chapter J') undersells your technical depth and can cause ATS filters to rank your resume below less experienced candidates.

Frequently asked questions

Do I need a PE license to get a structural engineering job in the US?

No, but it depends heavily on the role and firm. Entry-level and mid-level positions at design firms often hire EITs actively working toward licensure. However, project engineer and senior roles — especially those requiring you to stamp drawings — require an active PE, and in some states an SE license for certain building types. List your EIT status and expected PE exam date if you are not yet licensed.

How many projects should I list on a structural engineer resume?

Do not list projects as a separate section unless you are a consultant or the posting specifically asks for a project list. Instead, weave two to four representative projects into your work-experience bullets for each role, focusing on the ones that best match the target job. If the firm requests a separate project list, prepare it as a supplemental document rather than embedding it in the resume itself.

Should I tailor my structural engineer resume for each application?

Yes, and the minimum tailoring takes about fifteen minutes. Check the job description for specific software, building types, and codes mentioned, then make sure those exact terms appear in your skills section and at least one experience bullet if you have that background. Firms specializing in healthcare, data centers, or bridge work are looking for direct experience matches, and a generic resume will rank lower in both ATS scoring and human review.