Contoh CV Aerospace Engineer

Choose the right format for an Aerospace Engineer resume

Use a reverse-chronological format in almost every case. Aerospace hiring managers at contractors like Lockheed Martin, Raytheon, Boeing, and SpaceX expect to scan your most recent role immediately — they are not looking for a creative layout. Keep your resume to one page if you have fewer than ten years of experience; two pages is acceptable for senior engineers with extensive program history.

Use clean section headers, a single readable font such as Calibri or Arial at 10–12 pt, and consistent margin widths of 0.75–1 inch. Avoid tables, text boxes, and graphics — many defense contractor applicant tracking systems parse plain text and will scramble formatted elements.

• One page for early-career (0–9 years), two pages for mid-to-senior level
• Standard sections: Summary, Work Experience, Skills, Education, Certifications
• Save as a PDF unless the job posting specifically requests a Word document
• File name format: LastName_FirstName_AerospaceEngineer.pdf

Write a professional summary that lands interviews

Your summary should be three to four sentences that front-load your discipline (propulsion, structures, avionics, flight dynamics), years of experience, and one or two signature accomplishments. Skip phrases like 'results-driven' or 'team player' — they waste the recruiter's first eight seconds.

Example: "Aerospace Engineer with 8 years of experience in structural analysis and composite manufacturing for commercial and defense platforms. Led stress analysis on the empennage assembly for a next-generation regional jet, reducing component weight by 11% while meeting FAR Part 25 certification requirements. Proficient in NASTRAN, CATIA V5, and MATLAB. Active Secret clearance holder."

Write work-experience bullets that show impact

Every bullet should follow an action-verb + task + quantified result structure. Aerospace roles generate measurable outcomes — use them. Reference specific programs, aircraft designations, or mission types where your NDA allows. Avoid vague verbs like 'assisted' or 'supported'; use 'designed,' 'validated,' 'modeled,' 'integrated,' or 'qualified.'

Recruiters for government and defense programs also look for evidence of working within DO-178C, MIL-STD-810, or AS9100 quality frameworks, so name the standard alongside the result.

• Performed CFD analysis using ANSYS Fluent on a hypersonic inlet geometry, reducing drag coefficient by 7.3% and cutting wind-tunnel test iterations from 12 to 4 across a 14-month development cycle.
• Led failure modes and effects analysis (FMEA) for a satellite reaction control subsystem under MIL-STD-1629A, identifying 3 critical failure modes that were resolved before CDR and preventing an estimated $2.1M in redesign costs.

Skills and certifications recruiters and ATS systems look for

Aerospace ATS filters are heavily keyword-driven, especially on government contract positions posted through USAJOBS or Cleared Jobs. Mirror the exact terminology from the job posting — write 'finite element analysis' and 'FEA,' not just one or the other. Group your skills into logical clusters: analysis software, CAD/CAM tools, standards and methodologies, and programming languages.

Certifications matter significantly in this field. An active security clearance (Secret or Top Secret/SCI) is often a hard filter, not a preference — list clearance level and adjudication date. Professional Engineer (PE) licensure in mechanical or aerospace engineering signals independent technical authority and is valued for senior roles.

• Analysis tools: NASTRAN, ANSYS, ABAQUS, MATLAB/Simulink, STK (Systems Tool Kit)
• CAD/PLM: CATIA V5/V6, SolidWorks, Siemens NX, Windchill, Teamcenter
• Standards: AS9100D, DO-178C, DO-254, MIL-STD-810, FAR/JAR Part 25
• Certifications: PE License, FAA Airframe & Powerplant (A&P), PMI-PMP, Six Sigma Green/Black Belt
• Programming: Python, MATLAB, C++, Fortran (legacy code environments)

Education, licenses, and extras that close the deal

List your highest degree first: degree name, major, university, and graduation year. For aerospace roles, a BS or MS in Aerospace, Mechanical, or Electrical Engineering from an ABET-accredited program is the baseline expectation. GPA is worth including if it is 3.5 or above and you graduated within the last five years. Omit high school entirely.

Below education, add a short section for publications, patents, or thesis titles if they are relevant to the role — a published paper on combustion instability is a differentiator for a propulsion position. List any active professional memberships such as AIAA or SAE, especially if you have held a committee or leadership role. If you hold an active security clearance, list it prominently — either in your summary and in a dedicated 'Clearance' line near the top of the resume.

• Include thesis or capstone project title if it aligns with the target role
• List AIAA, SAE, or AHS International membership with any officer positions
• Note relevant coursework only for new graduates with limited work history

Mistakes to avoid

• ×Listing security clearance only in the body of a work bullet instead of calling it out in the summary and a dedicated line, causing ATS filters to miss it entirely.
• ×Using generic action verbs like 'helped' or 'worked on' instead of specific engineering verbs — 'modeled,' 'validated,' 'qualified,' or 'integrated' — which signals junior thinking regardless of actual experience level.
• ×Omitting the specific aircraft program, spacecraft platform, or missile system you worked on when it is publicly disclosed information, which makes your experience sound theoretical rather than program-proven.
• ×Applying a single resume to both commercial aviation and defense positions without tailoring the standards cited — FAR Part 25 and DO-178C signal very different domain expertise to hiring managers in each sector.

Frequently asked questions

Do I need a security clearance listed on my aerospace resume?

Yes, if you hold one, list it prominently — in your summary and in a standalone line such as 'Clearance: Secret (Active, 2022).' Many defense contractor positions are hard-filtered for clearance eligibility before a human ever reads the resume. If you held a clearance that has lapsed, note it as 'Secret (Expired 2021, eligible for reinstatement)' so recruiters can assess reinvestigation timelines.

How do I write an aerospace resume with no professional experience?

Lead with your education section and include your senior capstone or thesis project as if it were a work experience entry, with bullets that quantify results — weight targets met, simulation accuracy achieved, or test milestones completed. Internships, co-ops, NASA Pathways positions, and university research assistantships all belong in a Work Experience section and should be written with the same action-verb and metric structure as any professional role.

Should an aerospace engineer include a portfolio or GitHub link on their resume?

Include a GitHub link if it contains relevant simulation scripts, MATLAB models, or documented personal projects — label it clearly and make sure the repositories are public and well-documented before submitting. A portfolio link is appropriate for roles in UAV design or space systems startups where showing hardware or CAD work adds context. For classified defense roles, never include any project artifacts that touch on restricted programs, even indirectly.