Przykład CV, Embedded Software Engineer

Choose the right format for an Embedded Software Engineer resume

Use a reverse-chronological format. Hiring managers at aerospace, automotive, medical device, and consumer electronics companies expect to see your most recent firmware or RTOS work first. A functional format buries the timeline and raises red flags with technical leads who want to know exactly what hardware you touched and when.

Keep the resume to one page if you have fewer than ten years of experience; two pages are acceptable beyond that. Use clean section headers, a 10–12 pt serif or sans-serif font, and consistent whitespace. Avoid tables and text boxes — many applicant tracking systems (ATS) used by companies like Texas Instruments, Bosch, and Medtronic parse left-to-right and will scramble columnar layouts.

• Stick to .docx or plain PDF — check the job posting for preference
• List each role with: company, title, location, and month/year dates
• Keep margins between 0.5 and 1 inch; no smaller
• Name the file: LastName_FirstName_EmbeddedSWE.pdf

Write a professional summary that targets embedded roles specifically

Your summary sits directly below your contact information and should be three to four sentences that immediately signal your hardware-software boundary expertise. Name the processor families you know, the RTOS platforms you have shipped on, and one measurable outcome. Generic phrases like 'results-driven engineer' waste the only part of the resume a recruiter reads in under ten seconds.

Example: "Embedded software engineer with 7 years developing safety-critical firmware for automotive ECUs on ARM Cortex-M4 and M7 platforms. Proficient in C/C++, FreeRTOS, and AUTOSAR Classic, with hands-on experience using JTAG/SWD debuggers, logic analyzers, and CANalyzer. Reduced ECU boot time by 34% on a production ADAS module and hold an ISO 26262 Functional Safety Engineer certification. Seeking a senior role in a team shipping real-time control systems at volume."

Write work-experience bullets that prove impact with numbers

Each bullet should follow an action-verb + task + measurable result structure. Embedded roles have plenty of quantifiable outcomes: boot time, interrupt latency, memory footprint reduction, defect density, code coverage percentage, and power consumption. If your company treated metrics as confidential, use ranges or percentages instead of absolutes.

Avoid vague bullets like 'worked on firmware development.' Recruiters and engineering managers skim for specifics that confirm you can own a full bring-up cycle, write drivers, debug at the register level, and collaborate with hardware teams.

• Rewrote SPI and I2C peripheral drivers in bare-metal C for an STM32H7 platform, cutting interrupt service routine latency from 18 µs to 6 µs and eliminating a class of race conditions that had caused 12% of field returns.
• Implemented a custom memory allocator within a FreeRTOS application running on NXP i.MX RT1060, reducing heap fragmentation by 41% and enabling the product to meet a 128 KB RAM constraint without a hardware revision.

Skills and certifications recruiters and ATS look for

Embedded job descriptions are dense with keywords. Your skills section should mirror the specific terms in the postings you target. Separate programming languages, hardware interfaces, tools, and methodologies into labeled sub-groups so both ATS and human reviewers can scan quickly.

Certifications carry real weight in regulated industries. ISO 26262 Functional Safety Engineer (TÜV), IEC 62443 cybersecurity credentials, and MISRA C compliance experience are explicitly required or preferred at Tier 1 automotive and medical device suppliers. If you hold a Certified Embedded Systems Engineer (CESE) credential or have completed an SEI CERT C training, list it.

• Languages: C, C++, Python (for test scripting), occasionally Rust
• RTOS: FreeRTOS, Zephyr, VxWorks, QNX, ThreadX
• Interfaces: UART, SPI, I2C, CAN, LIN, Ethernet, USB
• Tools: JTAG/SWD debuggers (J-Link, OpenOCD), oscilloscopes, logic analyzers, CANalyzer, Lauterbach TRACE32
• Standards and methodologies: MISRA C, AUTOSAR, DO-178C, IEC 62443, Agile/Scrum in hardware-constrained teams

Education, licenses, and extras that strengthen an embedded resume

List your highest degree first: degree name, major, university, and graduation year. A BS or MS in Electrical Engineering, Computer Engineering, or Computer Science is the baseline expectation at most companies. If your GPA was 3.5 or above and you graduated within the last five years, include it. Relevant coursework such as real-time operating systems, digital signal processing, or computer architecture is worth one line if you are early-career.

Below education, add a short section for patents, publications, open-source contributions (link to a GitHub repo with actual embedded projects), and conference presentations. If you have contributed to a well-known open-source RTOS or a hardware abstraction layer, name the project and your specific contribution. Side projects with custom PCBs, bare-metal bring-up, or FPGA co-design distinguish you from candidates whose experience is limited to application-layer work.

Mistakes to avoid

• ×Listing microcontroller families without specifying the peripherals, toolchains, or debug interfaces you actually used, which tells a hiring manager nothing about your real depth.
• ×Omitting RTOS version numbers and configuration details — saying 'used FreeRTOS' is far weaker than 'configured FreeRTOS 10.4 with static allocation and tickless idle mode on a Cortex-M0+ running at 32 MHz.'
• ×Using a heavily formatted, multi-column template that causes ATS parsers to misread your job titles, dates, and skills, effectively hiding your qualifications from the initial screening.
• ×Failing to mention safety standards or coding standards compliance (MISRA C, DO-178C, ISO 26262) even when you followed them on the job, which disqualifies you from filtered searches in automotive, aerospace, and medical device pipelines.

Frequently asked questions

Should an embedded software engineer include hardware design experience on a resume?

Yes, briefly. Hiring managers value engineers who can read schematics, probe signals, and work directly with electrical engineers during bring-up. List specific hardware skills — oscilloscope use, signal integrity troubleshooting, or schematic review — in a tools or skills subsection rather than inflating your title to hardware engineer. Keep the focus on the software and firmware work that defines the role.

How do I show embedded experience if most of my work is under NDA?

Describe your contributions at the functional level without disclosing proprietary details: name the processor family, the RTOS, the communication protocol, and the outcome in percentage or relative terms. You can also build and reference personal or open-source projects on GitHub that demonstrate the same skills — a bare-metal driver library or a Zephyr-based sensor node is concrete evidence that stands on its own.

Is a one-page resume realistic for an embedded engineer with 10+ years of experience?

Two pages are standard and expected at that experience level in embedded roles. Use the extra space to detail multiple hardware platforms, safety-standard experience, and leadership on bring-up or architecture decisions — all of which matter to senior hiring panels. Do not pad with outdated tools or irrelevant coursework just to fill the page; every line should earn its place.